Vision TC3-AMP audio amplifier 2.0 channels Home White

In stock
SKU
TC3-AMP
Add to Compare
£148.31 £123.59
2 x 25w @ 8 ohms, 80Hz~22kHz, 98dB, 2 x Stereo inputs, IR Remote control
Add to Wish List
By using latest low-impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module. Front Panel Input Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use. D-Class Amplifier Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary Power Four Speakers Don’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers). Preset Memory By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms. Tactile Dial A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input. Remote Control A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product. Easy to Install and Uninstall A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required. Cables Included Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect. Secure Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. Close at Hand Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms. Integrated Techconnect Family Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.
More Information
SKU TC3-AMP
EAN 3446595000006
Specification
Audio
Frequency range80 - 22000 Hz
Audio output channels2.0 channels
Peak power per channel25 W
Amplifier classD
Total Harmonic Distortion (THD)1%
Signal-to-Noise Ratio (SNR)98 dB
RMS power output per channel (8 Ohm)25 W
Input sensitivity500 mV
Input impedance50000 Ω
RMS rated power50 W
Ports & interfaces
Audio (L/R) in2
Audio (L/R) out2
DC-in jackYes
Technical details
PurposeHome
Product colourWhite
Connectivity technologyWired
Remote control includedYes
Sustainability certificatesRoHS
Harmonized System (HS) code85184000
Power
AC input frequency50 - 60 Hz
AC input voltage100-240 V
DC input voltage12 V
Power consumption (typical)50 W
Weight & dimensions
Width42 mm
Depth46 mm
Height64 mm
Weight63 g
Certificates
CertificationRoHS, WEEE, CE/EMC, RCM, FCC
Packaging data
Package dimensions (WxDxH)240 x 205 x 63 mm
Package weight1.1 kg
Packaging content
Remote control includedYes
Manufacturer Vision
In Stock Y
Back to Top

Vision TC3-AMP audio amplifier 2.0 channels Home White

£148.31 £123.59